|নাম:||10 মিলিয়নের বেশি অপারেশন টাইমস ইন্টেলিজেন্ট ব্যারিয়ার বেড়া বুম||মোটর রেটযুক্ত শক্তি:||50W, সর্বোচ্চ 100W|
|ভোল্টেজ, বৈদ্যুতিক একক বিশেষ:||AC90V ~ AC264V, অতিরিক্ত DC24V||কাজের পরিবেশ:||-40 ℃ ~ 75 ℃|
|MTTR:||<0.5Hrs||MTBF:||> 500 মিলিয়ন অপারেশন টাইমস|
More Than 10 Million Operation Times Intelligent Barrier Fence Boom
For rapid toll processing
Rapid, reliable, and economical processing of road users is essential when collecting toll charges at bridges, tunnels and on roads. Toll Barriers from Magnetic have been specially designed for this situation. the barriers is characterised by its speed, lack of maintenance and energy efficiency, and thus keeps long-term costs down. The Toll Barriers can be adapted to meet individual requirements,the speed when closing can be adjusted.and it can be equipped with a variety of control devices, flanges and barrier booms. All barrier boom types can be provided with the optional swing-away flange. In the case of a collision with a vehicle, the barrier boom is released and can be manually re-engaged afterwards. This protects the barrier boom and the drive unit. There is also the optional auto-swing-away flange for the soft boom, which automatically re-engages after a collision with a vehicle.
1.When Power off, gate automatically open, no clutch design, no need human intervention. When power on, gate automatically reset,
restore to the gate closing state, truly unattended, fire safety standards. If special requirement, manual operation is required when
power off . Operating arm open and close by hand also can be realized by setting up control board DIP switch, which ensure that the system can be used at any time.
2. The use of Single Balance Spring device, good regulation, no noise, indefatigable, not easy to break, safe and reliable.
3. A variety of input and output modes can be selected, normally open normally closed optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install.
5. Closing speed can be adjusted, 0.9S, 1.3S.
6. Barrier gate up&down signal relay switch output.
7. Barrier gate running state: OK signal output indicating that the gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared sensor signals anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function, regardless of the current gate in what state, the operator through the triple push button,
software or remote control to issue a gate arm up, the gate will give priority to the implementation of the opening action.
13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing out to avoid damage to the vehicle
and barrier gate machine.
14. Delay down selection function.
15. high sensitivity arm auto reverse function (intensity can be adjusted)
16. Parking system interface
17.RS485 or RS232 network communication control up&down interface (no need to install communication module)
18. Anti-collision alarm signal interface.
19. Arm direction can be changed easily
20. Adjustable speed port (S curve adjustment)
21. High-strength precision cast steel, industry moving parts beyond the industry quality
|Opening And Closing Time||0.3S,0.6S,0.9S,3S,4S|
|Motor Rated Power||50W,Max 100W|
|Working Environment||-40 ℃ ~85 ℃|
|Lifetime||More than 10 million operation time or 10 years|
|MTBF||>500 million operation times|
|Relative Humidity||≦ 90%|
|Remote Distance||≦ 100m|
Each barrier will include:
|1 pcs Barrier|
|1 pcs arm boom (from 1m to 6m can customised)|
|1 pcs control panel(built inside)|
|2 pcs remote controllers, 1 pc push button|
|1 pcs manual book|
1. Drive Motor is warranted against manufacturer’s defect for lifetime
2. Standard warranty for all components is valid for12 months from the date of delivery
3. This warranty does not include damages caused by:
a. Wear and Tear
d. Act of God & Natural Disaster
e. Unstable power supply (i.e. inconsistent voltage or lightning)
A: Follow the steps on below to complete your order.
- 1. Inquiry
Provide us detailed information about your requirement, and we'll recommend the suitable products according to your request
Official quotation form with all clear specifications according to the order
Invoice will be issued once the quotation is confirmed.
Payment shall be issued once the invoice issued. Full payment is acquired.
Bulk production shall be taking 15-25 working days.
by sea, air or courier. Detailed picture of package will be provided upon the service you've chosen. Packaging info will be sent upon confirmation.
Contact us for pricelist and catalog: